+32 (0)16 904066
Call us
The Electrical Facelift for your dimmers
As incandescent lighting will be phased out in the future, you might think dimmers are going to be a thing of the past and ready for the scrapheap. Think again, because why would you get rid of a solid working infrastructure when you can extend the lifetime of your dimmer racks by at least another decade?
Easy Switch upgrade for ADB Eurodim
for individual ADB TwinTech modules
for individual ADB Eurodim 1, 2 & 3 modules
for individual ADB Dimostat ATH, ATV & ATN modules
Eurodim Options
Easy Switch upgrade available for all types of ADB Eurodim cabinets.
Pick 'n Mix system
Remote or local switching
The Easy Merger+ for total control
Easy Switch for ADB Eurodim TwinTech modules*
The Easy Switch upgrade for TwinTech modules consists of built-in processor controlled relais and a Touch Controller for quick and easy-to-use configurations. Safely connect LEDpars, moving lights, boosters, Artnet nodes, sound equipment, projectors, single phase motors etc.
The especially developed Easy Switch Mod/DMX makes switching from dimming to fixed power very safe and easy.
Sounds like magic? Not really, it's all very simple! Read more about how and why it works on our FAQ page.
* for Standard diagnostic version only!
CONFIGURATION EXAMPLE
Generate fixed, safe 230V on the outputs of the existing dimmers with the Easy Switch upgrade for Eurorack dimmer modules. The modular set-up allows for a 'Pick & Mix' principle. Configure all or some outlets to your own needs and budget.
The processor controlled relais or hardware switch allows for safe and easy-to-use configurations. Safely connect LEDpars, moving lights, boosters, Artnet nodes, sound equipment, projectors, single phase motors etc.
The fully autonomous system is completely customizable, regardless of the age of your installation.
Sounds like magic? Not really, it's all very simple! Read more about how and why it works on our FAQ page.
Easy Switch for individual modules
Ideal for TV Studios with hoists!
ES Mod/DMX advantages
Easy Switch upgrade available for all types of ADB Eurodim cabinets.
independant of the DMX signal of the lighting desk
no influence on normal use of circuits
No problems with patch, parking channels
No panic if some else loads their show file into your system
Customised markings and stickers available
With the Easy Switch Modbus/DMX (ES Mod/DMX) solution it is possible to switch to fixed voltage in complete safety without having to park channels.
What is ES Mod/DMX?
Easy Switch Mod/DMX is the reliable Pino Solutions Touch Controller that merges a DMX signal on HTP via Modbus with the existing line to your TwinTech cabinets.
When the ES Mod/DMX sends out a signal FF for more than 7 seconds, the Easy Switch switches the relay and this remains active. You now have real, safe, 230V fixed voltage on your outlets.
There is much confusion amongst users of ADB dimmers as to what the DimSwitch function actually is. It is a curve setting that only works with a DMX signal.
Easy Switch for ADB Eurodim modules
Easy Switch upgrade available for most types of ADB Eurodim modules. (2x3kW & 1x5kW)
For individual Eurodim 1, Eurodim 2, Eurodim 3 modules
Configure all or some outlets to your own needs
Regardless of the age of your installation
Stand alone system
Update of HRC cartridge fuses to circuit breakers with differential/earth leakage
[RCD/MCB or RCBO (=MCB+RCD)]
Special options
Switching of module(s) with an ES Mod/DMX controlled relais (see above)
CONFIGURATION EXAMPLE
The Easy Merger+ for full channel control
Special options
Switching of module(s) with an ES Mod/DMX controlled relais
The Easy Merger+ for full channel control
Total Control with the Easy Merger+
The Easy Merger+ lets you pick out parts of the signal so you don't have to worry about your Easy Switch set up when someone hooks up their desk to your network.
It's a simple, easy and cheap solution to protect your equipment and parts of your venue installation.
The Easy Merger works autonomous, regardless of the Easy Switch set up. it is placed in the DMX line to your dimmers. The channels you have switched with the Easy Switch are taken out of the line and are inaccessible to guest users.
A must for venues who have a lot of guest productions and share their house line!
It allows for loads to be 'switched' rather than dimmed. Contrary to what can be read in the user manual of the ADB TwinTech, using the DimSwitch still means the current is sent via thyristor or Solid State Relay. This remains phase cut and is only suitable of an ohmic load.
For a more detailed explenation about how and why the DimSwitch function is not the same as real fixed voltage: take a look at our FAQ page.
Beware of DimSwitch!
With the Pino Solutions Easy Switch you can generate REAL fixed voltage on your outlets.